The Ultimate DIY Kit

Be sure to be equipped for any DIY task with our ultimate DIY kit featuring our powerful two-gear hammer action drill and our best-selling MYLEK drill bit accessory kit – this set is packed with everything you need to complete a wide range of DIY tasks at home or out on the job. Here at MYLEK, we pride ourselves on providing outstanding, reliable products at affordable prices and this kit is no exception.

MYLEK 4orce Cordless Drill

This kit includes the powerful cordless hammer drill from our 4orce range of power tools, this drill is packed full of features that make this drill comfortable and easy for beginners and experts alike. The body of this drill has been constructed with the highest quality material to ensure a robust build that will continue to perform its best even with heavy-duty use.

Powerful Brushless Motor

This drill houses a brushless motor which boats more efficiently than brushed motors for longer lasting and dependable performance. Brushless motors do not suffer from energy loss due to friction caused by components rubbing together which improves energy efficiency and enables batteries to operate 50% longer. Brushless motors also offer a much higher torque torque-to-weight ratio resulting in an increased torque per watt power. Brushless motors will also be less susceptible to mechanical wear for an increased lifetime.

Feature Packed for Outstanding Performance

This two-gear hammer action drill comes back with other features all designed to improve the overall performance and ease of use – this makes this drill an excellent choice for everyone from beginners to pros. This drill features a 19 + 3 torque selection and variable speed triggers which offer greater control and easy speed adjustments. This drill boasts an impressive no-load speed between 400-1600rpm and an incredible 50Nm max torque. The keyless quick-change chuck makes switching out attachments and drill bits much easier and can house 0.8 – 13mm attachments. The forward and reverse switch also makes switching between drilling and screwing a breeze while the quick-stop brake means you are constantly in complete control of your drill.

Designed with Comfort and Ease of Use in Mind

On top of an outstanding feature-packed performance, this drill has also been designed with comfort and ease of use at the forefront. The lightweight body (weighing only 1.2kg) and cordless design make for easy manoeuvrability without feeling flimsy. The handle features anti-shock moulding that will reduce the impact felt while using the drill helping to reduce discomfort and fatigue especially when using your drill for long periods.  

Fast Charge Battery

It’s easy to make sure your drill is always powered up and ready to go thanks to the powerful 2000mAh Li-ion battery, which is interchangeable across the 4orce range so if you own any other tools from the range you will have an extra supply of power on hand. The battery also uses fast-charge so you don’t need to wait around all day for your drill to recharge before getting down to work. The battery also features an advanced no-self-discharge feature which improves the battery's capability to retain its power even when in storage.

What’s in The Box

·        MYLEK 4orce Cordless Hammer Action Drill

·        2000mAh Li-ion Battery

·        3-pin UK plug

·        Charger

·        13-piece Accessory Kit

·        Carry Case

MYLEK 4orce Drill Bit Set

This kit also includes the 4orce drill bit set, with a choice of 4 different sizes – 50-piece, 56-piece, 128-piece or 204-piece set. So, you can ensure you are never caught short on any job all in one handy case.

Made with Highest Quality Materials

Each drill bit in these kits has been crafted using high-grade materials such as Tungsten, HSS and CRV which means these pieces will effortlessly drill through a wide range of materials. The materials used are also incredibly durable with high shock resistance and ductility.

Complete a Wide Range of Jobs

The durable construction and wide variety of pieces available means you can complete a wide range of DIY tasks on a wide range of surfaces including wood, brick, concrete blocks, metal, plastic and more.

Complete with Handy Storage Case

All the drill bits can be kept well organised in the handy storage case that comes with the drill bit set – so you can ensure every piece is always in reach when you need it.

What’s in the Box

50-piece set

·        9pcs HSS twist drill bit set: HSS4241, Titanium coated and edge ground, HRC60-63: 1.5, 2.0,2.5,3.0,3.5,4.0,4.5,5.0,6.0mm

·        5pcs woodworking drill, #45 carbon steel, black and white:4,5,6,8,10mm

·        5pcs stone drill, milled, sand blaster: shank is #45 carbon steel, Tip is tungsten carbide YG8C: 4 5 6 8 10.0mm

·        6pcs 50mm bits, CRV6150： PH2, PH3, PZ2 PZ3, SL5 SL6

·        20pcs 25mm bit, CRV6150: SL4 SL5 SL6 SL7, PH1 PH2X2 PH3 PZ1 PZ2X2 PZ3, T10 T15 T20 T25 T30, S1 S2 S3

·        3pcs Nut driver, sand blaster, 50BV30: 6,8,10.0mm magnetic bit holder

·        1pcs counter sink

56-piece set

·        5pcs screwdriver bits: material is S2 high-grade steel, finishing is sandblaster. HRC 48-51, 25mm, CRV6150:PZ0, PZ1, PZ2, PZ3, H6

·        1pcs gradient spirit level (on front of the case)

·        5pcs screwdriver bits: material is S2 high-grade steel, finishing is sandblaster, HRC 48-51, 25mm, CRV6150: PH0, PH1, PH2, PH3, T35

·        6pcs masonry drill bit sandblaster: the shaft material is #45 carbon steel, the tip material is tungsten carbide YG8C 5.0, 2x6.0, 2x8.0, 10.0mm

·        6pcs HSS4241 twist drill bits: raw material is HSS 4241, titanium coated, edge ground, 118 tip angle, HRC60-63:2, 3, 4, 5, 6, 8mm

·        5pcs Wood Working drill bits: roll forged, #45 Carbon steel, black and white 4, 5, 6, 8, 10mm

·        1pcs countersink

·        4pcs hole saw, carbon steel: 32, 38, 44, 54mm

·        1pcs hole saw arbour

·        1pcs Allen key

·        1pcs magnetic holder: shaft material is #45 carbon steel, HRC 42-48

·        20pcs screwdriver bits: material is S2 high-grade steel, finishing is sand blaster, HRC 48-51, 25mm, CRV6150: SLOTTED 3/4/5/6/7, S1/2/2/3, H3/4/5/5/6, T10/15/20/25/30/40

128-piece set

·        11pcs HSS twist drill bit, raw material is HSS 4241, Titanium coated, Edge Groud,118 tip angle, HRC60-63:1.5,2.0,2.5,3.0,3.5,4.0,4.5,5.0,5.5,6.0,6.5mm

·        5pcs woodworking drill, #45 Carbon steel roll forged, black and white: 4 5 6 8 10 mm

·        5pcs masonry drill bit, sand blaster:4.0,5.0,6.0,8.0,10.0mm, the shalf material is #45 carbon steel, the tip material is tungsten carbide YG8C 

·        9pcs nut driver: 5.0,6.0, 7.0,8.0,9.0,10.0,11.0,12.0,13.0mm, material is 50BV30, finishing: sand blaster HRC 42-48 

·        1pcs magnetic holder: shalf material is #45 carbon steel, HRC 42-48 

·        1pcs countersink: material is #45 carbon steel, HRC 42-48 

·        20pcs screw driver bits ,25mm, CRV6150: PH1x2 PH2x2 PH3, PZ1x2 PZ2x2 PZ3 ,4.0MM 5.0MM ,6.0MM, T15, T20, T25, T30, S1, S2, S3: material is CRV6150, finishing is sand blaster, HRC 48-51 

·        12pcs 50mm, screw driver bit ,50mm: PH1 PH2 PH3, PZ1 PZ2 PZ3, 4.0MM,5.0MM,6.0MM, T15, T20, T25: material is CRV6150, finishing is sand blaster, HRC 48-51 

·        3pcs flat drill: 13mm,16mm,19mm 1pcs gauge ruler 

·        60pcs wall plug

204-piece set

·        38pcs HSS 4241 drill bits, titanium coated, edge ground, DIN 338, 118 degrees, HRC 58-64:1.0x4; 1.5x4; 2.0x4; 2.5x4;3.0x3; 3.2x4; 3,5x2; 4.0x3; 4.5x2; 4.8x2; 5.0; 5.5x2; 6.0x2; 6,5;

·        14pcs Brad Point Drill Bits, C45, HRC 40-45：3.0x3 ;3.5, 4.0x3; 4,5; 5.0; 5,5; 6.0; 6,5,8.0, 10.0mm

·        5pcs Masonry drill: 4/5/6/8/10 mm                                                                                      

·        3pcs Flat wood bits, 13/16/19mm                                                                                        

·        14pcs screwdriver bits, 50 mm, CrV6150, HRC 52-55, Slotted 3/4/5/6/8mm; Phillips #1, #2, #3; PZ1, PZ2, PZ3, Star T10, T15, T20"                                                     

·        20pcs screwdriver bits, 25 mm, CrV6150, HRC 52-55 Slotted 3/5/6/8mm; Phillips #0, #1, #2, #3; Square S1, S2, S3; Star: T10, T15, T20, T25, T30, PZ0, PZ1, PZ2, PZ3                                   

·        10pcs Nut driver, 50BV30, HRC 30-50, 4/5/6/7/8/9/10/11/12/13mm                        

·        2pcs screw finders, ABS material

·        4pcs drill stopper, 3-6-8-10 mm, 

·        4pcs hole saws with arbor: 32, 38, 44, 54, 

·        1pcs hole saw adapter with drill, C45

·        1pcs counter sink

·        1pcs magnetic bit holder, size 60 mm

·        1pcs ratcheting screwdriver handle, left/right 

·        1pcs flexible drive:150mm

·        1pcs hex shank 

·        84pcs wall plugs, material PP, grey colour, different sizes assorted

Additional Information

This drill is fully CE certified / EU Batteries Directive Compliant / UN38.3 and RoHS compliant to the highest UK standards and comes with a 2-year warranty.